Removing a door hinge pin can be a daunting task, especially when the pins are non-removable. However, it is a necessary skill to have if you want to avoid damage to your door or frame during maintenance or repair work. In this guide, we will provide you with step-by-step instructions on how to remove door hinge pins with non-removable pins. So, if you want to learn how to do it right and avoid costly mistakes, keep reading!
Introduction
Door hinges are an essential part of any door, but they often require maintenance or replacement. Removing a door hinge pin is a crucial step in the process, but what if the hinge has non-removable pins? In this article, we will discuss how to remove a door hinge pin with non-removable pins.
What are non-removable pins?
Non-removable pins are hinges that are designed to have the pins permanently attached to the hinge plates. This design is often used in heavy-duty or security doors to prevent tampering or forced entry. While these hinges are durable and reliable, they can be challenging to remove the hinge pins.
Tools needed for the job
Before removing the door hinge pin with non-removable pins, it’s essential to have the right tools. Here are the tools required for the job:
- Hammer
- Nail punch
- Screwdriver
- Pliers
Steps to remove non-removable pins
Removing non-removable pins can be a bit tricky, but it’s not impossible. Here are the steps to follow:
Step 1: Check the hinge type
Before starting, it’s important to determine the type of hinge you’re dealing with. If the hinge has a removable pin, it will be visible on the top or bottom of the hinge plate. If the pin is not visible, it’s likely a non-removable pin hinge.
Step 2: Inspect the hinge
Inspect the hinge to determine how the hinge pins are attached. Non-removable pins are often secured in place with a small metal tab or rivet on the top or bottom of the hinge plate.
Step 3: Loosen the hinge pin
Use a hammer and a nail punch to tap the hinge pin up and out of the hinge plate. If the pin is difficult to move, use pliers to grip the pin and wiggle it back and forth to loosen it.
Step 4: Remove the metal tab or rivet
If the hinge pin doesn’t move, it’s likely that a metal tab or rivet is holding it in place. Use a screwdriver to remove the metal tab or rivet by prying it up and away from the hinge plate.
Step 5: Remove the hinge pin
Once the metal tab or rivet is removed, use a hammer and nail punch to tap the hinge pin up and out of the hinge plate. If the pin is still difficult to move, use pliers to grip the pin and wiggle it back and forth to loosen it.
Step 6: Reinstall the hinge pins
After removing the hinge pins, inspect them for damage or wear. If they’re in good condition, reinstall them by tapping them back into place with a hammer and nail punch.
Conclusion
Removing a door hinge pin with non-removable pins can be a challenging task, but with the right tools and techniques, it’s not impossible. By following the steps outlined above, you can remove non-removable hinge pins and replace them with new ones, ensuring that your door is functioning correctly and securely.
Frequently Asked Questions
1. Can non-removable door hinge pins be removed?
Yes, non-removable door hinge pins can be removed with the help of a few tools. You can use a hammer, screwdriver, and pliers to remove the pin. First, place the screwdriver under the head of the pin and gently tap it with a hammer. This will loosen the pin. Then, use the pliers to grip the head of the pin and pull it out of the hinge.
2. What is the purpose of removing a door hinge pin?
The purpose of removing a door hinge pin is to remove the door from the frame. This can be helpful when you need to replace the door or paint it. Removing the door hinge pin will allow you to take the door off the hinges without damaging the frame or the door. It is also useful if you need to adjust the fit of the door in the frame or repair the hinge itself.